Per description – SuporteEPI

Iron on High Visibility Hi Vis reflective ELASTIC Heat Transfer Film

Tue, 18 Aug 2026 12:58:54 +0000

SKU: SUPREFTAPEHTE-6MATERIAL & CONSTRUCTION:Type: Iron on / Heat Transfer (this product is intended only to heat transfer on fabric or similar surfaces. This may not sew on or stick to any products)Backing Material: PET film with hot melt adhesiveRetroreflective daytime fabric color – SilverWeight: 6 – 7 ozDESIGN & SIZINGRecommended for Medium to heavy Weight Fabrics, such as high-quality safety vest or jackets.Machine washable, shrink resistant, wrinkle resistant, quick drying, durable colors.Retroreflective sizing options1” width Silver – 2.54 cm wide retroreflective material2” width Silver – 5.08 cm wide retroreflective material4” width Silver – 10.16 cm wide retroreflective materialCOMPLIANCEANSI / ISEA 107-2015 – American Standard on High Visibility Safety ApparelCSA Z96 – Canadian Standard on High Visibility Safety ApparelOther Certifications – EN 20471Home Wash Cycles: > 50 cycles @60℃（140℉）Reflective coefficient: >420WASH / CARE INSTRUCTIONS.Machine washableShrink resistantWrinkle resistant,Quick drying,Durable colorsAPPLICATION INSTRUCTIONS Things needed: An ironing mat or a similar material (example towel), a nice solid table, your project (example T-shirt) and the heat transfer vinyl tapeApplicationFlip your imageCut and weed – The goal when cutting heat transfer vinyl is to not cut through the clear carrier sheet (shiny side). This plastic sheet acts like transfer tape, keeping your design tacked down to your fabric while pressing. It also protects the fabric from the direct heat of the press or iron.Pre-Press Your Fabric – Get that fabric nice and warm before attempting to apply the vinyl. Heating up the fabric open the fibers, allowing the adhesive from the vinyl to really absorb into the material during the press. So go ahead and press your fabric for 2-3 seconds with your iron/heat pressTemperature + Pressure + Time -Not all vinyl has the same heat setting, and it is crucial to your success to follow your manufacturer’s heat setting recommendations. Typically, a cotton-blend setting with temperatures in 350-375 deg F range will work for most applications.The next part of the HTV application equation is pressure. If using an iron, you need to really put your weight on the iron while you’re pressing. Make sure your pressing surface is hard and can handle having you press with all you might on it.Finally, make sure you know the ideal pressing time. 10-15 seconds is the typical pressing time. You don’t want to scorch the adhesive by keeping the heat on too long and over pressing.Know when to peel – Changes slightly by the type of application and tape.If not sure, ALWAYS check out YouTube instructional videos and do a tryout on a small sample. Normal 0 false false false EN-US X-NONE X-NONE

Sew on High Visibility Hi Vis Double sided ELASTIC REFLECTIVE TAPE – Silver

Tue, 18 Aug 2026 12:58:49 +0000

Type: Sew on (this product is intended only to sew on fabrics. This may not heat transfer or stick to any products). THIS PRODUCT IS A SEW ON PRODUCT. CSA Z96 – Canadian Standard on High Visibility Safety Apparel.

FR – Non FR High Visibility Hi Vis Reflective Tapes, Wholesale-Bulk , Lot of 10

Tue, 18 Aug 2026 12:58:43 +0000

High Visibility Reflective Tapes. Sew On High Visibility Reflective Tape – Double Elastic. Sew On High Visibility Reflective Tape – Single Elastic. Sew On High Visibility Reflective Piping. Iron On Reflective Elastic Heat Transfer Film.

Iron on High Visibility Hi Vis reflective Heat Transfer Film

Sat, 15 Aug 2026 06:59:13 +0000

SKU: SUPREFTAPEHT-5Attachment Type: Iron On or Heat TransferDaytime Color: silverBacking fabric: PET film and hot melt adhesiveReflective coefficient: ＞420Home Wash Cycles: Up to 50 cycles @60°C (140°F), depends on the condition of substrates and heat transfer operations.Width: up to 105cm, all sizes availableCertification: ANSI/ISEA 107-2015Application: suitable for anti-light heat on non-elastic fabrics such as polyester and knitting HOW TO APPLY:Cut the iron on / heat transfer reflective tape to desired length.Set the heat temperature of iron at about 120*CPlace the tape by adhesive side down on the fabric.Put the iron on the tape and move it along the tape pressing firmly. you need 15-30 seconds to let the tape be attached to the fabric.Wait for 10-15 seconds to let it cool.Carefully peel off the transparent film from the applied reflective tape.Cover attached reflective tape with a piece of cloth and iron on for a 2-3 seconds.Remove cloth and admire your work!!Always remember, IF IN DOUBT, DO A TRYOUT with a 2” x 1” size tape on a scrap piece of fabric Normal 0 false false false EN-US X-NONE X-NONE

Sew on High Visibility Hi Vis Checkered REFLECTIVE TAPE

Sat, 25 Jul 2026 12:03:47 +0000

Flame Resistant Sew on High Visibility Hi Vis Retro Reflective fabric tape

Wed, 15 Jul 2026 02:02:30 +0000

SKU: SUPREFTAPEF-3, SUPREFTAPEF-4MATERIAL & CONSTRUCTION:Type: Sew on (this product is intended only to sew on fabrics. This may not heat transfer or stick to any products)Backing Fabric: 65% Polyester / 35% CottonRetroreflective daytime fabric color – SilverWeight: 6 – 7 ozDESIGN & SIZINGRecommended for Medium to heavy Weight Fabrics, such as high-quality safety vest or jackets.Machine washable, shrink resistant, wrinkle resistant, quick drying, durable colors.Retroreflective sizing options1” width Silver – 2.54 cm wide retroreflective material2” width Silver – 5.08 cm wide retroreflective material4” width Silver – 10.16 cm wide retroreflective material2” width colored (Lime/Silver and Orange/Silver) – ~ 2.0 cm retroreflective material.0.25” Retroreflective pipingCOMPLIANCEANSI / ISEA 107-2015 – American Standard on High Visibility Safety ApparelCSA Z96 – Canadian Standard on High Visibility Safety ApparelOther Certifications – EN 20471, OEKO TEX 100Home Wash Cycles: > 50 cycles @60℃（140℉）Reflective coefficient: >420WASH / CARE INSTRUCTIONS.Machine washableShrink resistantWrinkle resistant,Quick drying,Durable colorsAPPLICATION INSTRUCTIONS THIS PRODUCT IS A SEW ON PRODUCT. It is typical of any sew on fabric and may be sewed on with any home or commercial sewing machine.Sew this product on any typical fabric or product.By design, this product does not heat transfer or stick on any material.

Sew on High Visibility Hi Vis Retro Reflective fabric tape

Wed, 15 Jul 2026 02:02:28 +0000

SKU: SUPREFTAPE-2MATERIAL & CONSTRUCTION:Type: Sew on (this product is intended only to sew on fabrics. This may not heat transfer or stick to any products)Backing Fabric: 65% Polyester / 35% CottonRetroreflective daytime fabric color – SilverWeight: 6 – 7 ozDESIGN & SIZINGRecommended for Medium to heavy Weight Fabrics, such as high-quality safety vest or jackets.Machine washable, shrink resistant, wrinkle resistant, quick drying, durable colors.Retroreflective sizing options1” width Silver – 2.54 cm wide retroreflective material2” width Silver – 5.08 cm wide retroreflective material4” width Silver – 10.16 cm wide retroreflective material2” width colored (Lime/Silver and Orange/Silver) – ~ 2.0 cm retroreflective material.0.25” Retroreflective pipingCOMPLIANCEANSI / ISEA 107-2015 – American Standard on High Visibility Safety ApparelCSA Z96 – Canadian Standard on High Visibility Safety ApparelOther Certifications – EN 20471, OEKO TEX 100Home Wash Cycles: > 50 cycles @60℃（140℉）Reflective coefficient: >420WASH / CARE INSTRUCTIONS.Machine washableShrink resistantWrinkle resistant,Quick drying,Durable colorsAPPLICATION INSTRUCTIONS THIS PRODUCT IS A SEW ON PRODUCT. It is typical of any sew on fabric and may be sewed on with any home or commercial sewing machine.Sew this product on any typical fabric or product.By design, this product does not heat transfer or stick on any material.

Reflective fabric tape Sew on High Visibility Hi Vis Retro

Wed, 15 Jul 2026 02:02:26 +0000

Type: Sew on (this product is intended only to sew on fabrics. This may not heat transfer or stick to any products). THIS PRODUCT IS A SEW ON PRODUCT. NEON Orange: 2″ Orange Fabric (100% Nylon) 1″ Reflective.